Precautions for the production process of common multi-span greenhouse gutters
The gutter of the multi-span greenhouse is an important part of the connection between the shed and the shed. The gutter of our common multi-span greenhouse is divided into a gutter made of ordinary iron plates and an aluminum alloy integrated gutter. Among them, the most common use is the gutter for bending galvanized iron sheets. The aluminum alloy gutter is a kind of gutter that we have redeveloped after the introduction of Dutch greenhouses in recent years. Today we will mainly talk about the bending of galvanized sheets. The production process and precautions of the gutter.
The role of multi-span greenhouse gutters
1. Drainage effect
Since the multi-span greenhouse is connected by multiple spires or multiple arches, the top area is large, and the water accumulated on the spires or spires will slide to both sides and be discharged to both ends of the greenhouse through the gutter. The super long distance will also design the internal drainage mode.
2. Bearing effect
Another important function of the gutter is load-bearing. When installing the arch pole, you step on the gutter to walk back and forth. At the same time, when the snow falls, it also slides to the gutter. Therefore, when we design, we design the thickness of the gutter according to the snow load in different regions.
3. Connection function
Holes are reserved on both sides of the gutter, which can be connected with the arch poles of the film multi-span greenhouse and the girder beams of the glass multi-span greenhouse to play a supporting role and also a part of the core structure.
