Greenhouse Features

1.Greenhouse Structure Frame: Top Dome type

2.Mainly Frame: Hot-Dip Galvanized steel Pipe

3.Cover material: The top and all around covering for Cold Frame Plastic Sheeting for Greenhouse.

cold frame plastic sheeting for greenhouse manufacture

Greenhouse Introduction

1. Cold Frame Plastic Sheeting for Greenhouse contains UV anti-aging, and the shading net adopts 6-pin shading net material, and the shading rate is about 90%!

2. It is assembled and measured manually, so there is an error of 3-5 cm.

3. The total height of greenhouse is 195 cm, including the height of the spire, which is about 40 cm.

4. According to the needs of plant production, on the basis of the traditional structure of single-door conservatory products, we designed one more window, 4 windows, 6 windows, 8 windows or front and rear double doors to achieve air convection and ventilation.

5. All planters should take appropriate measures to prevent wind and freeze according to the environment and weather changes in the flower room. Measures to minimize losses.

6. When the outer cover is not in use, take it off and wash it away to prolong its service life.

cold frame plastic sheeting for greenhouse factory