What are the styles of the greenhouse roller shutter machine?

What are the styles of the greenhouse roller shutter machine?

What are the styles of the greenhouse roller shutter machine? What are the installation steps of the greenhouse roller shutter machine? The following roller shutter machine manufacturers will introduce these knowledge to customers.

Greenhouse roller shutter machine, referred to as roller shutter machine, is an agricultural machinery and equipment used for automatic rolling and unwinding of grass curtains in greenhouses. It is divided into front type and rear type according to the placement position, and electric and manual according to the power source. Curtain machine, generally use 220V or 380V AC power supply.

What are the styles of the greenhouse roller shutter machine?

The common greenhouse roller shutter machine is an agricultural machinery and equipment used for automatic rolling and unwinding of greenhouse grass curtains. What styles of greenhouse roller shutter machines are available?

1. According to different power sources, it is divided into electric and manual. The most commonly used is the electric rolling shutter machine, which generally uses 220V or 380V AC power supply.

2. Rear wall fixed greenhouse roller shutter machine: also called rear scroll type, rear pull type or pull wire type greenhouse roller shutter machine, and the names vary from place to place. This type of roller blind machine appeared earlier in the market, and it consists of three main parts: the main engine, the roller rod and the column. The basic principle of this type of roller blind machine is to change the roller rod through the main engine, and the roller rod surrounds the pull rope and the pull rope. Pull the thatch or quilt. When the straw thatch or insulation quilt is dropped, it will slide down along the slope of the shed surface with its own weight.

3. Shed surface self-propelled type: also called flexion and extension type greenhouse roller shutter machine. It consists of three major parts: the main engine, the support rod, and the roll rod. And according to the different types of the supporting rod of the greenhouse rolling machine, it is divided into a bracket-type greenhouse rolling machine and a track-type greenhouse rolling machine. The supporting rod of the former consists of a vertical rod and a supporting rod. The basic working principle of the rolling shutter machine is to change the rolling rod through the host, and the rolling rod directly pulls the straw or the insulation quilt, and the pulling and releasing are powered by power support. It is a type of rolling shutter machine that is widely used at present.

The appearance of the greenhouse roller shutter has promoted the mechanization development of the greenhouse industry. Its main engine is a reducer, and the commonly used five-axis all-steel shell. personal and financial interests.

The appearance of the roller shutter machine has promoted the mechanization development of the greenhouse industry. Its main engine is a reducer, and the commonly used one is a five-axis all-steel shell. and economic interests

The installation steps of the greenhouse roller shutter machine:

1. Pre-weld various connection movable knots and flanges to the pipe; determine the strength of the crossbar according to the length of the shed (generally, the shed below 60 meters uses a 2-inch high-frequency welded pipe with a wall thickness of 3.5 mm; for those above 60 meters, except Use 2-inch pipes at each end of 30 meters, and use high-frequency welded pipes with a diameter of 2.5 inches on both sides of the main machine) and length; weld the shaft teeth of the pipe shaft; if a double-pipe vertical rod is required, weld the double-pipe.

2. Fix the motor on the host and install the belt.

3. Lay down the straw curtains on the shed in turn from the middle to the two sides, align the bottom, and lay a non-elastic rope under each curtain.

4. Dig a pit and bury ground piles at a distance of 1.5 to 2 meters in front of the shed.

5. Connect the vertical pole and the main engine, and lay the horizontal pole to prepare the connection.

6. Connect the machine rod from the middle to the two sides, that is, the reel.

7. Fix the rope under the curtain to the shaft teeth.

8. Connect the reverse switch and power supply.

9. Test the machine, roll the roller blind machine to the roof, observe the parallelism of the straw curtain, then lower it to the ground, put some straw curtains and other objects in the slow roll, and then roll up until the roll is in a straight line.