Two fixing methods for building a vaulted shed in a smart greenhouse.

Two fixing methods for building a vaulted shed in a smart greenhouse.

To build an arch in a smart greenhouse, in order to strengthen the stability of the columns on both sides, there are two common fixing methods: steel wire, bamboo board fixing and steel frame fixing

1: Steel wire and bamboo board are fixed.

There are round holes at both ends of the bamboo pole above the column, and there are also round holes 20 cm above the column, which are tightened from between the two with steel wire. For stronger stability, tie a bamboo board on the outside, and place the two ends of the bamboo pole above the column on the bamboo board. If the distance is far, use wood in the middle, and use two steel wires to tie the bamboo board and the first steel wire. The stability is greatly improved. This fixing method is simple and low in cost, and the arched shed only needs tens of yuan.

2: fixed steel frame.

Smart Greenhouse

The smart greenhouse steel frame chooses a U-shaped steel frame, which is stuck on the column, and the column and support are fixed with a jacket, and only two jackets are needed up and down. The cost of such a steel structure is not high, only a few yuan each. Intelligent greenhouse vegetable greenhouse is built and this steel structure can be reused, and the effect is stronger than steel wire and bamboo board.