How to maintain the greenhouse during construction
Room greenhouse, also known as conservatory. A facility that can transmit light, keep heat (or heat) and grow plants. In the season that is not suitable for plant growth, it can provide greenhouse growth period and increase yield, and is mostly used for plant cultivation or seedling raising of vegetables, flowers, trees and other plants in low temperature season. There are many types of greenhouses, which can be divided into many types according to different roof truss materials, lighting materials, shapes and heating conditions.
How to maintain the greenhouse during construction? ? How much do you know about this? Today I will tell you the specific method, I hope it will help you.
1. Storage and maintenance before construction The glass should be stored in a dry and hidden place, away from water and sunlight. Try to stand it upright, on a wooden or rubber-matted shelf.
2. Precautions during construction Before handling the glass, make sure that there are no scars and cracks on the edge of the glass that are likely to cause rupture. During the construction process, do not let the glass touch hard objects, and no hard objects should be placed under the glass, but wooden blocks or rubber pads can be placed.
Avoid welding sparks falling on the glass, and also prevent the pollution of paint and mortar. When part of the glass is not installed in one day, writing or stickers should be written on the installed glass to prevent impact.
3. Cleaning and maintenance in use Most of the greenhouses are used for the production of plants such as flowers and vegetables. When the glass is not polluted, the greenhouse has sufficient lighting, which is suitable for the growth and development of plants. With the passage of time, the glass surface will be continuously polluted by smoke and dust, which will cause the decrease of the light transmission performance of the glass, thus affecting the use of the greenhouse. Therefore, during the production and use of the greenhouse, the glass covering surface should be cleaned in time according to the degree of contamination to ensure the normal lighting of the greenhouse and the normal growth of crops.








