How to Build a Greenhouse

How to Build a Greenhouse

1. First determine the installation location, and determine the number and length of greenhouses according to the land area and current situation.

2. After determining the position, pull the wire and sprinkle with lime

3. Drill holes on the lime line according to the predetermined skeleton spacing, and insert greenhouse pipes on both sides

4. Use the roof connecting pipe to connect the greenhouse pipes on both sides together

5. The spring card is stuck on the top longitudinal rod (some are three longitudinal rods)

6. Three sets of hardware clips are stuck in the film slot

7. Install the greenhouse reinforcement rods and the solid pipes at both ends of the greenhouse

8. Cover the film, tighten the lamination line, and the greenhouse is basically completed, and you're done.