The greenhouse has been in a high temperature and high humidity environment for a long time, and the key element that endangers the name of the homepage is the state of each component. Therefore, the key framework must be maintained on time. The metal frame is connected to the frame with screws to avoid the loosening of the anchor bolts. The tightness of the anchor bolts should be checked frequently. If the electric welded frame cracks, it should be repaired in time. For some metal structures that have no hot-dip galvanizing solution, wipe the anti-corrosion paint on time to increase the service life of the structure.
The arch shed pole of the greenhouse is very important. The key function of the pole is to support and prevent the shed surface from bending. Restricted by the construction of the greenhouse, once the arch canopy pole is broken, it is more difficult to remove and replace the pole again. It is proposed to add poles at the opposite part of the arch to support the deformed frame.
The greenhouse roller shutter machine has gone through a winter application, and it can be maintained just when it is free in summer. Check the operating conditions of each transmission system location, and immediately disassemble and replace if there is any situation that affects the use. Check the tightness and looseness of the standard parts and tighten them immediately if they are loose. Damage to the shed film is inevitable, but it must be repaired immediately. The repair method can use transparent tape to bond the torn part, or use a special coating glue to repair, and it can also cover a new layer of sub-film in the damaged area.
