The heat preservation quilt has low production cost and good heat preservation effect, and is widely used in agricultural production greenhouses. In order to extend the service life of the insulation quilt and reduce the production cost, the correct use of the insulation quilt is a problem that cannot be ignored. When using the insulation quilt, pay attention to cover, otherwise it will affect the insulation performance and reduce the service life of the insulation quilt.
The correct use of greenhouse heat preservation is noticed:
(1) The overlap between the two beds should not be less than 250px when the quilt is warmed up, and it should be adjusted in time if it is out of shape during the application process.
(2) After the heat preservation is covered, the equipment on the wall of the shed should be fixed and pressed tightly around to prevent it from being blown up by the wind to reduce the consequences of heat preservation.
(3) When the heat preservation is enveloped at the bottom of the greenhouse, if there is water at a high altitude, there must be clear water even if the heat preservation is to prevent the heat preservation from being wetted and corrupted.
(4) When the insulation is on the top of the back wall of the greenhouse, care should be taken to avoid getting wet when it rains.
