Tinted Multiwall Polycarbonate Sheet Building Material B&Q

We improve the technology level of our Pvc Greenhouse Fittings, Reinforced Greenhouse Plastic, Pvc Greenhouse Door through design optimization to effectively reduce production costs. We have gained a lot of recognition among customers spread all across the world. We are a strong company with advanced equipment, cooperation experience with key customers and large business production capacity.

Product Show

The basic requirements for using a circular arched shed are 8 meters wide, 30 meters long, 1.8 meters high at the shoulders, and 3 meters high at the top. 04m or more. The material is made of hot-dip galvanized steel, and 3 longitudinal tie bars are designed to enhance the wind and pressure resistance. 4 longitudinal film-pressing grooves (2 grooves on each side) are designed. The skirt film is 40cm high, and the upper side is fixed with a film pressing groove, and the lower side is buried in the soil to enhance wind resistance and sealing. The second pass is installed 140cm off the ground, and the roll film and the skirt film repeat 30cm. 6 vertical poles are installed at the ends; a film-pressing rope is installed between the two arches of each raft to increase wind resistance, and windproof braces are installed at the four corners of the shed to increase the stability of the shed Door, door size is 1.8 × 1.4m, each seat total 2 pillar.

General greenhouse technical description(can be customized according to specific requirement):

1.greenhouse plastic home depot has a span of 8m,the best length is 30-40 m,the greenhouse is inserted about 0.4 m,and the shoulder height is about 1.8 m.

The top height is about 3 meters,the arch spacing is 1 meter,and the three vertical pipes are connected.

2.The standard single-inserted insert-proof net is set in the middle of the two card slots and fixed by hot-dip galvanized card slots.

3.The steel structural materials are all made of hot-dip galvanized pipes,and the service life is more than 10 years.

1.The covering material is made of film,the insert net is 40 mesh

The unit not marked in this figure are all in millimeters(mm),and other unfinished matters are implemented in accordance with relevant nation regulations.

We have a technical team engaged in production and R&D of Tinted Multiwall Polycarbonate Sheet Building Material B&Q for many years, with industry-leading professional knowledge and technical level. We believe that the sincere efforts of all staff can make us have a good job opportunities and working environment. We have advanced production equipment, perfect testing means and an experienced and innovative design team.