Polycarbonate Sheet Nz

We are committed to providing a green service chain for Entertainment Greenhouse, Greenhouse Sheeting Polycarbonate, Garden Greenhouse Stores manufacturing and operating industries and related strategic emerging industries. We have strengthened our diversified business layout through business innovation and integration of quality industrial resources. Our company has a mature design level in product design and production. Over the years, we have won wide praise for our excellent quality and professional service attitude.

Product Show

The basic requirements for using a circular arched shed are 8 meters wide, 30 meters long, 1.8 meters high at the shoulders, and 3 meters high at the top. 04m or more. The material is made of hot-dip galvanized steel, and 3 longitudinal tie bars are designed to enhance the wind and pressure resistance. 4 longitudinal film-pressing grooves (2 grooves on each side) are designed. The skirt film is 40cm high, and the upper side is fixed with a film pressing groove, and the lower side is buried in the soil to enhance wind resistance and sealing. The second pass is installed 140cm off the ground, and the roll film and the skirt film repeat 30cm. 6 vertical poles are installed at the ends; a film-pressing rope is installed between the two arches of each raft to increase wind resistance, and windproof braces are installed at the four corners of the shed to increase the stability of the shed Door, door size is 1.8 × 1.4m, each seat total 2 pillar.

General greenhouse technical description(can be customized according to specific requirement):

1.greenhouse plastic home depot has a span of 8m,the best length is 30-40 m,the greenhouse is inserted about 0.4 m,and the shoulder height is about 1.8 m.

The top height is about 3 meters,the arch spacing is 1 meter,and the three vertical pipes are connected.

2.The standard single-inserted insert-proof net is set in the middle of the two card slots and fixed by hot-dip galvanized card slots.

3.The steel structural materials are all made of hot-dip galvanized pipes,and the service life is more than 10 years.

1.The covering material is made of film,the insert net is 40 mesh

The unit not marked in this figure are all in millimeters(mm),and other unfinished matters are implemented in accordance with relevant nation regulations.

We achieve stable quality of our Polycarbonate Sheet Nz with institutionalization and standardization, and promote continuous quality improvement with scientific research and innovation. After exploring various business models, we now have formed the stable development situation. We stick to our enterprise spirit of 'Quality, Performance, Innovation and Integrity'.