Irrigation&Hydroponics Equipment Nft Hydroponic Growing Channels Systems for Cold Frame High Tunnel Greenhouses

Our 15 Mil Plastic Greenhouse, 200 Micron Greenhouse Plastic, Pc Greenhouse Strawberries are far superior to similar products on the market in terms of performance and price. We adhere to the business purpose of making more profits and cultivating a loyal customer base. Our company will always adhere to the quality policy of 'always provide high quality products and services to meet customer expectations'. We carry out the quality policy of "making good products and providing warm services".

Product Description

8mm PC Hollow Sheet Small Greenhouse for Home Use has transparency high, and quality light, and anti-impact, and noise, and insulation, and difficult burning, and anti-aging, features, is a hi-tech, and integrated can extremely excellence, and energy-saving environmental type plastic plate. PC sheet greenhouse has the characteristics of light structure, anti-condensation, good lighting, good load performance, excellent heat preservation performance, strong impact resistance, and durability. The greenhouse with 8mm PC Hollow Sheet Small Greenhouse for Home Use as the covering layer specially used in the big wind and rain area.

How to Installed PC Sheet Greenhouse:

1.Stretch:

According to the elevation of the drawing, the position size of the sun panel ceiling and the measured center line, the main skeleton position line of the sun panel ceiling is ejected. 

2.Embedded parts:

According to the position of the main frame of the sun panel ceiling of the elevation control line, check whether the elevation of the upper surface of the entrance beam meets the design requirements. If there is a difference, it should be cut or leveled with high-strength cement mortar. The size of the buried steel plate releases the position line of the expansion bolt, and then drills to place the expansion bolt, and installs the steel plate and the expansion bolt to fix it. Then cast the main skeleton center-line onto the embedded steel plate

3.Install the main skeleton:

According to the position line of the main frame of the pop-up solar panel ceiling, first install the two ends and then the middle part.The method is: after the main frame of the square steel pipe (galvanized) is assembled on the roof, it is manually placed on the position line and suspended vertically by a line Surface, temporarily fixed in the middle and welded with the embedded steel plate. After the main skeletons at both ends are installed, the middle and both sides are pulled at a specified height (three vertical lines are measured from the support at both ends of the steel plate, and then installed from one end to the other one by one until the completion.

4.Glue and install bead:

After fully checking the installation quality of the 8mm PC Hollow Sheet Small Greenhouse for Home Use, install the inner solar panel, play weather-resistant adhesive, and install special aluminum alloy beading. The spacing and position of the screws of the bead must meet the requirements of the drawing

While focusing on continuously improving product quality, we also pay special attention to the development of various new Irrigation&Hydroponics Equipment Nft Hydroponic Growing Channels Systems for Cold Frame High Tunnel Greenhouses. Our stable and professional management service team ensures the high efficiency of our services, and the logistics system and regional warehouses allow product circulation. We are committed to the corporate philosophy of people-oriented and fine management, and continue to improve our company's operations and efficiency.