Hot Dipped Galvanized Steel Frame Greenhouse with Roof Vent

We firmly fulfill our core mission and strive to build the brand reputation of the most reliable supplier of the Small Greenhouses For Home Use, Polyethylene Plastic Sheeting Greenhouse, Dome Greenhouse. We see our corporate purpose of creating a better society through our work as the source of our growth and the origin of our centripetal force. We believe that the company's stable economic growth needs to rely on the adoption of new technology and equipment and the improvement of labor culture and technology.

Product Description

8mm PC Hollow Sheet Small Greenhouse for Home Use has transparency high, and quality light, and anti-impact, and noise, and insulation, and difficult burning, and anti-aging, features, is a hi-tech, and integrated can extremely excellence, and energy-saving environmental type plastic plate. PC sheet greenhouse has the characteristics of light structure, anti-condensation, good lighting, good load performance, excellent heat preservation performance, strong impact resistance, and durability. The greenhouse with 8mm PC Hollow Sheet Small Greenhouse for Home Use as the covering layer specially used in the big wind and rain area.

How to Installed PC Sheet Greenhouse:

1.Stretch:

According to the elevation of the drawing, the position size of the sun panel ceiling and the measured center line, the main skeleton position line of the sun panel ceiling is ejected. 

2.Embedded parts:

According to the position of the main frame of the sun panel ceiling of the elevation control line, check whether the elevation of the upper surface of the entrance beam meets the design requirements. If there is a difference, it should be cut or leveled with high-strength cement mortar. The size of the buried steel plate releases the position line of the expansion bolt, and then drills to place the expansion bolt, and installs the steel plate and the expansion bolt to fix it. Then cast the main skeleton center-line onto the embedded steel plate

3.Install the main skeleton:

According to the position line of the main frame of the pop-up solar panel ceiling, first install the two ends and then the middle part.The method is: after the main frame of the square steel pipe (galvanized) is assembled on the roof, it is manually placed on the position line and suspended vertically by a line Surface, temporarily fixed in the middle and welded with the embedded steel plate. After the main skeletons at both ends are installed, the middle and both sides are pulled at a specified height (three vertical lines are measured from the support at both ends of the steel plate, and then installed from one end to the other one by one until the completion.

4.Glue and install bead:

After fully checking the installation quality of the 8mm PC Hollow Sheet Small Greenhouse for Home Use, install the inner solar panel, play weather-resistant adhesive, and install special aluminum alloy beading. The spacing and position of the screws of the bead must meet the requirements of the drawing

Our company will maintain the purpose of progress by science and development, to meet customer needs to develop better Hot Dipped Galvanized Steel Frame Greenhouse with Roof Vent. In the future, we will pay close attention to market supply and demand, flexibly adjust business plans, ensure cost advantages, and increase operating capacity. With extremely experienced staff and technology, we can offer an excellent level of quality, service and reliability in a very short lead-time and at low cost.